Advertisement
Disposal of used parts
25
Disposal of used parts
Sign indicating EU collection system
174
User qualification: instructed user, see
n
qualification' on page 16
NOTICE!
Regulations governing the disposal of used parts
–
Note the national regulations and legal stand‐
ards that currently apply in your country
The manufacturer will take back decontaminated used devices pro‐
viding they are covered by adequate postage.
Decontaminate the device before returning it for repair. To do so,
remove all traces of hazardous substances. Refer to the Material
Safety Data Sheet for your feed chemical.
A current Declaration of Decontamination is available to download
on the ProMinent website.
In accordance with the European Directive 2012/19/EU on waste
electrical and electronic equipment, this device features the symbol
showing a waste bin with a line through it. The device must not be
disposed of along with domestic waste. To return the device, use
the return and collection systems available and observe the local
legal requirements.
Ä Chapter 2.4 'User
Advertisement
Need help?
Do you have a question about the DULCOMETER diaLog DACb and is the answer not in the manual?
Questions and answers
I need to recalibrate my prominent DiaLog DACb are there written instructions I can use
To recalibrate the ProMinent diaLog DACb, follow these steps:
1. Access the calibration function via the controller menu.
2. Use the arrow keys to navigate through the options.
3. Select the appropriate channel and parameter (e.g., Chlorine).
4. Adjust the slope (e.g., 5.99 mA/ppm) and zero point (e.g., 4.00 mA) as needed.
5. Confirm and save the new calibration values.
Ensure the calibration log book is active to store the changes.
This answer is automatically generated