Formal information and standards
13
Formal information and standards
13.1
Disposal of used parts
User qualification: instructed user, see
n
Ä Chapter 2.4 'User qualification'
on page 15
NOTICE!
Regulations governing the disposal of
used parts
–
Note the national regulations and
legal standards that currently
apply in your country
The manufacturer will take back decontami‐
nated used devices providing they are covered
by adequate postage.
Decontaminate the device before returning it for
repair. To do so, remove all traces of haz‐
ardous substances. Refer to the Material Safety
Data Sheet for your feed chemical.
A current Declaration of Decontamination is
available to download on the ProMinent web‐
site.
70
Sign indicating EU collection system
In accordance with the European Directive
2012/19/EU on waste electrical and electronic
equipment, this device features the symbol
showing a waste bin with a line through it. The
device must not be disposed of along with
domestic waste. To return the device, use the
return and collection systems available and
observe the local legal requirements.
13.2
Standards complied with
and Declaration of Con‐
formity
The Declaration of Conformity for the controller
is available to download on our homepage.
EN 61010-1 Safety requirements for electrical
equipment for measurement, control and labo‐
ratory use – Part 1: General requirements