Advertisement
26
Standards complied with and Declaration of Conformity
With devices with MET certification
Standards complied with and Declaration of Conformity
The Declaration of Conformity for the controller is available to
download on our homepage.
EN 61010-1 Safety requirements for electrical equipment for meas‐
urement, control and laboratory use – Part 1: General requirements
EN 61326-1 Electrical equipment for measuring, control and labo‐
ratory use – EMC requirements (for class A and B devices)
DIN EN 50581 - Technical documentation for the assessment of
electrical and electronic products with regard to the restriction of
hazardous substances
EN 60529 - Degrees of protection provided by enclosures (IP
code)
UL 61010-1:2012-05 and Revision 2016-04-29 including Amd
1:Nov 2018
CAN/CSA C22.2 No. 61010-1-12/AMD 1:2018
175
Advertisement
Need help?
Do you have a question about the DULCOMETER diaLog DACb and is the answer not in the manual?
Questions and answers
I need to recalibrate my prominent DiaLog DACb are there written instructions I can use
To recalibrate the ProMinent diaLog DACb, follow these steps:
1. Access the calibration function via the controller menu.
2. Use the arrow keys to navigate through the options.
3. Select the appropriate channel and parameter (e.g., Chlorine).
4. Adjust the slope (e.g., 5.99 mA/ppm) and zero point (e.g., 4.00 mA) as needed.
5. Confirm and save the new calibration values.
Ensure the calibration log book is active to store the changes.
This answer is automatically generated