Required Formalities; Disposal Of Used Parts; Standards Complied With And Conformity Declaration - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Required formalities

22 Required formalities
22.1

Disposal of used parts

User qualification: instructed user,
n
Ä Chapter 4.4 'Users' qualifica‐
see
tions' on page 21
NOTICE!
Regulations governing the disposal of
used parts
– Note the current national regula‐
tions and legal standards which
apply in your country
The manufacturer will take back decon‐
taminated used units providing they are
covered by adequate postage.
Decontaminate the device before sending
it for repair. To do so, remove all traces of
hazardous substances. Refer to the mate‐
rial safety data sheet for your feed chem‐
ical.
The current decontamination declaration
is available to download:
http://www.prominent.de/Service/
Download-Service.aspx
Standards complied with
22.2
and conformity declara‐
tion
You can find the EC Declaration of Con‐
formity for the controller as a download
under
http://www.prominent.de/Service/
Download-Service.aspx
168
EN 60529 Specification for degrees of
protection provided by enclosures (IP-
Code)
EN 61000 Electromagnetic compatibility
(EMC)
EN 61010 Safety requirements for elec‐
trical equipment for measurement, control
and laboratory use - Part 1: General
requirements
EN 61326 Electrical equipment for meas‐
uring, control and laboratory use - EMC
requirements (for class A and B devices)