Function Description [Off]; Functional Description Of [Relay Timer]; Function Description [Limit 1] Or [Limit 2] - ProMinent DULCOMETER diaLog DACb Assembly And Operating Instructions Manual

[Relays]
Setting the
17.1.1

Function description [Off]

17.1.2 Functional description of
17.1.3 Function description
142
Changeable scope of the menus
The number of adjustable parameters may differ
depending on the type and scope of the [Function]
selected. The controller provides you with the pos‐
sible adjustable parameters. Use the
to select them and confirm with
adjustment ranges are specified by the controller.
Relay 1
Function
Function
Cycle time
Min. time
Assignment
Fig. 106: Possible adjustable parameters with [Function] include,
for example, [Control variable]
[Off] , the relay does not accept any functions or
If the setting is
allow any actions.
[Relay timer]
[Relay timer] is a real-time timer based on relay 1 and 2. The
The
[ Relay timer] lets you perform recurring weekday and time-
dependent metering processes. Timer 1 is for relay 1 / Timer 2 is
for relay 2.
[Limit 1] or [Limit 2]
[Relay 1] and/or [Relay 2] can be operated as limit value relays.
The limit values can be set in the menu
[Limit values]' on page 131 .
Limit value relay used as an actuator
Extended functions
The limit value relays can also be defined in
–
such a way that they react like an actuator. If,
for example, a limit value relay is activated,
then it is deactivated if the pause contact is
closed and for a subsequent delay period t
t > 0 min is set).
d
or key
. The possible
6.1.1
Control variable
Increase value
10s
1s
Channel 1
Ä Chapter 14 'Setting the
(if
d
A1071