Table 5. Translational Switch Virtual Port Status; Table 6. Translational Switch Configured And Actual Frame Size - Enterasys SSIM-H2-02 Installation And User Manual

30
Status
Display only. Shows the current status of the virtual port.
Admin down
Waiting for port up
Up
Forwarding
Temporary down

Table 5. Translational Switch Virtual Port Status

MTU
You can use only one value as MTU.
MTU configured
1500

Table 6. Translational Switch Configured and Actual Frame SIze

Default: 1500
Max Broadcast Rate (frames/sec)
Sets the maximum broadcast frame rate; possible values are 0 to 5000 frames/sec
or Disabled. If enabled, this will limit the amount of broadcast frames being
forwarded from the TS side of the virtual port to the switch.
Default: Disabled
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Value
Actual TS frame size
1558
Meaning
The port or virtual port is disabled.
The virtual port is waiting for the port to
come up.
The virtual port is up but not
forwarding.
The virtual port is up and forwarding.
The virtual port is currently down,
because the port is temporarily down.
LF bits
001
Configuration