Network Management
Monitoring Network Events and Status
9.2.2.10 show users
Use this command to display information about the active console port or Telnet session(s) logged
in to the device.
show users
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to use the show users command. In this output, there is one telnet user at
IP address 10.1.10.10.
Matrix>show users
Console Port
------------
Active
Number of telnet users: 1
Telnet Session Users
--------------------
10.1.10.10
9-22
Matrix E1 Series (1G694-13) Configuration Guide