Video Out] Setting The Output Format For A Tv Connection - Contax U4R Manual

Introduction

[VIDEO OUT] Setting the Output Format for a TV Connection

You can choose between NTSC and PAL video output formats when the
camera is connected to a television through the VIDEO OUT port on the
USB cradle. Different TV signal formats are used in different countries.
When you are on holiday, you should configure the video output to match
the format for your destination country.
B Note
If the D connector cable is connected, the camera will automatically switch to D3 output
format regardless of this setting.
1
Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
2
Move the selector lever up u or down d
to select [VIDEO OUT], then move the
lever right r.
3
Move the selector lever up u or down d
to select the video output format, then
press E.
The selected setting is applied.
[NTSC]: Video output format used in, for instance, Japan and the U.S..
(Default)
[PAL] : Video output format used mostly in Europe.
B Note
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-179
Nomenclature
Set Up
SET UP(3/3)
VIDEO OUT NTSC
STARTUP MODE STILL
DISPLAY INFO ON
FILE NO. EXECUTE
MODE RESET EXECUTE
SET UP(3/3)
VIDEO OUT NTSC
STARTUP MODE PAL
DISPLAY INFO ON
FILE NO. EXECUTE
MODE RESET EXECUTE
Menus and Settings Troubleshooting