Shutter Vol] Adjusting The Volume Of The Shutter Sound - Contax U4R Manual

Introduction

[SHUTTER VOL] Adjusting the Volume of the Shutter Sound

Use this procedure to adjust the volume of the shutter sound.
1
Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
2
Move the selector lever up u or down d
to select [SHUTTER VOL], then move the
lever right r.
3
Move the selector lever up u or down d
to select the desired volume, then press
E.
The selected volume is applied.
[+3] : Maximum volume
[+2] : Medium volume (Default)
[+1] : Low volume
[OFF] : No shutter sound
B Note
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-170
Nomenclature
Set Up
SET UP(2/3)
+ 2
BEEP
+ 2
SHUTTER VOL
DIGITAL ZOOM ON
START SCREEN SET
REC REVIEW 2SEC
LANGUAGE ENGLISH
SET UP(2/3)
+ 3
BEEP
+ 2
SHUTTER VOL
+ 1 + 1
DIGITAL ZOOM
START SCREEN OFF OFF
REC REVIEW 2SEC
LANGUAGE ENGLISH
Menus and Settings Troubleshooting