Viewing Movies - Contax U4R Manual

Introduction

Viewing Movies

«Applicable images: Movies only»
While playing movies, you can pause playback, move forward one frame at
a time (frame advance) and adjust the volume.
1
Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2
Move the selector lever left l or right r
to select the movie to playback, and up u
or down d to adjust the volume.
BNote
3
Press E.
Movie playback begins.
The table below shows the operations that can be performed during playback.
Operation
Selector lever up u
Selector lever down d
Selector lever left l
Contents Glossary
Getting Ready Taking Pictures
• You can also adjust the playback volume while
the movie is running.
• You can view image information before playing
back a movie. (
Increases the volume.
Decreases the volume.
Move selector lever once to stop the movie, and then begin scanning
backwards through the movie frame by frame each time you move the
selector lever. Hold the lever left for 1 second to scan back through the
movie at twice the playback speed.
Hold the lever left for another 2 seconds to scan back through the movie
at 4 times the playback speed.
Index
Playback
p.88)
Description
EN-96
Nomenclature
Set Up
NEXT
Menus and Settings Troubleshooting
00:00
00:16