Adjusting The Brightness; M] Using Exposure Compensation - Contax U4R Manual

Introduction

Adjusting the Brightness

[M] Using Exposure Compensation

«Applicable mode: C/M»
Use exposure compensation to adjust the brightness of your images. This
function is especially useful for shots where you did not get the ideal
exposure because the brightness of the subject and background were very
different. You can also use this feature when you deliberately want to shoot
under- or over-exposed images.
This camera allows you to adjust the brightness up to plus or minus 2.0 EV
in 1/3 EV increments.
1
Turn the camera on and press the mode buttons UD until
"C" or "M" lights up on the mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select EXP.COMP. [M] and press E.
4
Move the selector lever up u or down d
to select the desired compensation value
and press E.
The compensation value is now set to the selected value.
Contents Glossary
Getting Ready Taking Pictures
Darker
-2.0
Index
Playback
Brighter
+2.0
±0.0
(Default)
EN-67
Nomenclature
Set Up
EXP.COMP.
+2.0
NEXT
Menus and Settings Troubleshooting