Inserting The Memory Card - Contax U4R Manual

Introduction

Inserting the Memory Card

1
Check that the camera is turned off and
then open the card/battery cover.
Slide the card/battery cover in the direction of the arrow E to open it.
2
Insert the memory card.
Insert the memory card with the labeled side facing the LCD monitor.
When inserting the card, push it into the slot until it makes a clicking
sound and stops.
A Important
3
Close the card/battery cover.
Close the cover and slide it opposite to the direction of the arrow E to lock it.
B Note
Format the memory card in the camera before shooting to ensure the best possible
performance from the camera. (
Contents Glossary
Getting Ready Taking Pictures
• If the card does not slide in smoothly, the card may be upside down. Check that the
card is the right way up and do not try to force it into the slot.
• Do not attach stickers of any sort to the memory card as this may jam the card in
the slot so that you cannot remove it.
Index
Playback
p.163)
EN-30
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting