Setting The Flash Mode - Contax U4R Manual

Introduction

Setting the Flash Mode

1
Turn the camera on and press the mode
buttons UD until "C" lights up on the
mode select LED.
2
Press the flash button Y to select the
icon for the mode you want to set.
The flash mode icon changes in the cycle shown below each time you
press the flash button Y.
(Default)
B Note
This setting reverts to the default value when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-64
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting