Removing The Battery Pack - Contax U4R Manual

Introduction

Removing the Battery Pack

1
Check that the camera is turned off and then open the card/
battery cover.
2
Slide the catch that holds the battery
pack in place to the open position with
the tip of your finger.
3
Grasp the battery pack and pull it out of
the camera.
A Important
BNote
Contents Glossary
Getting Ready Taking Pictures
• Take care that you do not drop the battery pack.
The strong impact of dropping the battery pack
may cause it to leak battery fluid.
• Depending on the operating conditions of the
camera, the battery pack may heat up. Be
careful when removing the battery pack from the
camera.
If you do not intend to use the battery pack for a
long period of time, store it in a cool environment.
Index
Playback
EN-28
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting