Contax U4R Manual page 129

Introduction
5
Move the selector lever left l or right r
to select PictBridge [G] and press E.
The printer connection screen appears.
6
Use the USB cable supplied with the camera to connect the
USB cradle holding the camera to the printer.
A Important
Contents Glossary
Getting Ready Taking Pictures
• Do not connect the camera to the printer until the "CONNECT TO PRINTER"
screen shown in step 5 appears on the screen. If you connect to the printer before
this screen appears, the camera will enter PC mode and you will not be able to
print.
• Check the sizes of the USB connectors. Plug the small connector into the USB
cradle and the large connector into the USB port on your printer.
Index
Playback
EN-129
Nomenclature
Set Up
PictBridge
CONNECT TO PRINTER
RETURN
BACK NEXT
Menus and Settings Troubleshooting