Contax U4R Manual page 105

Introduction
3
Move the selector lever left l or right r
to select ERASE MULTIPLE [I] and press
E.
The multiple erase screen appears.
4
Move the selector lever up u to select
[SELECT AND ERASE], then press E.
A screen appears in which you can select the images to be erased.
BNote
5
Move the selector lever up, down, left or
right udlr to select an image to
erase, then press E.
[J] appears next to the selected image. Then repeat this procedure to
select the other images you want to erase. To deselect a selected
image, select an image marked with the Trash icon [J] and press E.
BNote
6
Press the SCENE button I.
A message appears asking you to confirm that you want to erase the images.
7
Move the selector lever up u to select
[EXECUTE], then press E.
The selected images are erased.
Contents Glossary
Getting Ready Taking Pictures
The selection screen for erasing images is
displayed in MULTI playback mode.
You can select up to 99 images.
Index
Playback
EN-105
Nomenclature
Set Up
ERASE MULTIPLE
ERASE MULTIPLE
SELECT AND ERASE
ERASE ALL
RETURN
SELECTED TO ERASE: 3
SEL/DESEL OK
RETURN
ERASE 3 FRAMES?
EXECUTE
RETURN
BACK NEXT
Menus and Settings Troubleshooting