Erasing A Selection Of Images (Select And Erase) - Contax U4R Manual

Introduction
4
Move the selector lever left l or right r to select the image
you want to erase.
5
Move the selector lever up u to select
[EXECUTE], then press E.
The image is erased and the next image appears.
If there are no further images, the "NO IMAGE" message appears.
BNote
6
Press the MENU button K.
BNote

Erasing a selection of images (SELECT AND ERASE)

You can use this function to select images and then erase them
collectively.
A Important
• You cannot erase protected images (
• When you erase an image with a postrecorded voice message (
1
Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2
Press the MENU button K to display the menu icons.
Contents Glossary
Getting Ready Taking Pictures
• To erase another image, repeat steps 4 and 5.
• When you select an image from a group of
continuous shots, a screen is displayed to
confirm that you want to erase the group. Move
the select lever up u to select [EXECUTE],
then press E to erase all the images from
within the group of continuous shots.
In SINGLE playback mode, the erase confirmation screen is displayed when you
move the selector lever down d, even if you did not choose erase [J] from the
menu. Move the selector lever up u to select [EXECUTE] and press E to erase the
currently displayed image.
is also erased.
Index
Playback
p.107).
EN-104
Nomenclature
Set Up
ERASE IMAGE?
EXECUTE
CANCEL
p.110), the sound file
BACK NEXT
Menus and Settings Troubleshooting