Display Info] Choosing The Information Displayed On The Screen - Contax U4R Manual

Introduction
[DISPLAY INFO] Choosing the Information
Displayed on the Screen
In "C" and "M" modes, a large number of icons are displayed on the LCD
monitor. If you find the icons annoying when you are shooting, it is
possible to change the display to make the screen easier to view.
1
Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
2
Move the selector lever up u or down d
to select [DISPLAY INFO], then move the
lever right r.
3
Move the selector lever up u or down d
to select the display style, then press E.
The selected setting is applied.
[ON] : Icons for all of the current settings are displayed on the screen.
(Default)
[OFF] : Only the Flash mode, Macro/Landscape mode, Scene mode,
Digital Zoom Magnification and Date are displayed.
B Note
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-181
Nomenclature
Set Up
SET UP(3/3)
VIDEO OUT NTSC
STARTUP MODE STILL
DISPLAY INFO ON
FILE NO. EXECUTE
MODE RESET EXECUTE
SET UP(3/3)
VIDEO OUT NTSC
STARTUP MODE STILL
DISPLAY INFO ON
FILE NO. OFF
MODE RESET EXECUTE
Menus and Settings Troubleshooting