Film Speed Setting; Automatic Setting - Contax 167MT Manual

i
,ooo-G;;;=-
, . u 0 0
0 g
1- J)
l-
e l ,
Three types of film speed setting are available on this
camera. After the f ilm speed is sef in each case, be
sure to press the ISO Button to check the film speed
which has been set.
<Automatic setting>
Use a DX-coded film. lf you install a DX-coded film (lSO
25-5000)with the Main Switch at OFF, the camera will
automatically set itself for the speed of the film loaded in
it.
< Manuat setting>
lf you are using non-DX-coded film, or if you want to
change the film speed manually, move the Operating
Lever to the left or right while pressing the ISO Button so
that the desired film speed (lSO 6-6400) appears in the
Display Panel.
o lf you load a non-DX-coded film in the camera, the film
soeed which was set lor the previous film will remain in
the camera memory.
<Continuance of the previous fifm speed setting>
You can maintain the film speed you have previously set,
regardless of whatever film you load in the camera. For
this purpose, take out the exposed film with the Main
Switch at ON and close the Camera Back while the data
in the Display Panel remains on. Then open the Camera
Back and install a new ftlm.