Pressing The Shutter Release Button Half Way; When The Memory Card Is Full - Contax U4R Manual

Introduction

Pressing the shutter release button half way

When you press the shutter release button, it stops at a
point on the way down to the fully pressed position. At this
point, it is said to be pressed half way and the camera
determines the focus in readiness for taking a picture. If you
then continue pressing the shutter release button all the way
down, the camera takes the picture.
5
Press the shutter release button down
fully.
The camera emits the shutter sound and takes a picture.
BNote
A Important
For subjects that are closer than 60 cm to the camera, use macro mode to take the shot.
(

When the Memory Card is Full

When you cannot record any more images on a memory
card, the "MEMORY CARD FULL" message appears on the
LCD monitor. When this happens, try the following:
• Erase any unwanted images.
• Save your images onto a PC and then erase the images
stored on the memory card.
• Insert another memory card that has some available
space.
To erase images on a memory card, you can use [ERASE], [ERASE MULTIPLE] ([SELECT AND ERASE]
or [ERASE ALL]) or [FORMAT]. For more information on erasing images, see p.103. For more information
on formatting memory cards, see p.163.
To save images to a personal computer, use the USB cable provided. Refer to "Connecting to a Windows
PC" ( p.136) or "Connecting to a Macintosh" (
Contents Glossary
Getting Ready Taking Pictures
You can adjust the volume of the shutter sound.
( p.170)
p.56)
Index
Playback
p.146) for details.
EN-42
Nomenclature
Set Up
Not pressed
Pressed half way
Pressed fully
(starts picture
shooting)
Click
2 2 7 2
MEMORY CARD FULL
BACK NEXT
Menus and Settings Troubleshooting
0