Contax U4R Manual page 68

Introduction
5
Press the MENU button K.
The specified value appears on the LCD monitor.
A Important
• The exposure compensation setting does not change after a shot is taken.
• This setting reverts to the default value when you turn the camera off.
• When the flash is used, exposure compensation is limited to between -1.0 and +1.0 EV.
B Note
You cannot set the exposure compensation in Night View mode.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-68
Nomenclature
Set Up
+2 . 0
BACK NEXT
Menus and Settings Troubleshooting