Viewing Image Information (File No/Information) - Contax U4R Manual

Introduction
5
Press E to display the zoom area
movement screen.
Move the selector lever up, down, left or right udlr to scroll the
image in that direction.
Press E again to accept the selected magnification and area and
return to the playback screen (zoomed playback).
BNote
A Important
• Resized images cannot be viewed enlarged using zoomed playback.
• When you are enlarging images with a postrecording attached, perform this step while

Viewing Image Information (File No/INFORMATION)

«Applicable images: Still images / movies»
You can use the procedure below to check information such as the
aperture and shutter speed used to record an image.
1
Move the selector lever up u while the image is being
displayed.
The information for the displayed image appears.
The screen changes in the following order each time the selector lever is moved up u.
Normal
playback
A Important
For movies, moving the selector lever up u only adjusts the audio volume, and does not
display any information. To view movie information, first display the information for a still
image, then move the selector lever left l or right r to select the movie.
Contents Glossary
Getting Ready Taking Pictures
• Scroll bars are displayed at the bottom and on the right side of the zoom area
movement screen. The scroll bars act as a guide to which part of the original image
is currently displayed.
• During zoomed playback, move the selector lever left l or right r to move
forwards or backwards through the images while keeping the same magnification
and area selection.
the File No screen is displayed (
u
File Number
Display
100–KICX0001.JPG
u
Index
Playback
p.88).
u
Information
display
INFORMATION
100–KICX0001.JPG 1600KB 100–KICX0001.JPG 1600KB 100 KICX0001.JPG 1600KB
2272X1704 2272X1704 2272X1704
1/125 1/125 1/125 F2.8 F2.8 F2.8 ± 0.3 ± 0.3 0.3
ISO200 ISO200 ISO200
DPOF DPOF DPOF 0 PRTS 0 PRTS 0 PRTS
2004.09.01 12:34:56 2004.09.01 12:34:56 2004.09.01 12:34:56
EN-88
Nomenclature
Set Up
CHANGE AREA
X4.0 X4.0 X4.0
CHANGE
BACK NEXT
Menus and Settings Troubleshooting
OK