Using The Cleaning Pad; Attaching The Filter Adapter - Contax U4R Manual

Introduction

Using the Cleaning Pad

Attach the cleaning pad to the strap as shown in the illustration.
Clean the lens and LCD monitor with the side to which the cleaning cloth is attached.
When cleaning the lens, remove the lens hood before wiping the lens with the cleaning pad.
To remove the lens hood, grip the hood with your fingertips and turn it counterclockwise.

Attaching the Filter Adapter

Remove the lens hood, then attach the filter adapter by turning it clockwise.
Use commercially available 28mm diameter filters.
A Important
• The filter adapter is only for use with filters. Do not attach conversion lenses or any
• Do not use the flash (Flash Off mode). The correct exposure cannot be obtained.
• Depending on the type of filter, exposure and focusing may be affected. Please verify
• When removing the lens hood, take care not to touch the lens directly.
• Take care not to lose the lens hood.
Contents Glossary
Getting Ready Taking Pictures
other component that is not a filter.
before use.
Index
Playback
EN-38
Nomenclature
Set Up
BACK
Menus and Settings Troubleshooting