Inserting The Battery Pack - Contax U4R Manual

Introduction
Getting Ready

Inserting the Battery Pack

1
Open the card/battery cover.
Slide the card/battery cover in the direction of the arrow E to open it.
2
Insert the battery pack (BP-1100S)
supplied with the camera.
Ensure that the t on the camera matches the
as shown in the illustration, then insert the battery pack until the battery
stopper is securely locked.
3
Close the card/battery cover.
Close the cover and slide it opposite to the direction of the arrow E to
lock it.
A Important
If you insert the battery pack into the camera back to front, the camera may be damaged.
Make sure that the t on the camera and
insert the battery pack in the correct orientation.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
on the battery pack,
on the battery pack match to ensure that you
EN-27
Nomenclature
Set Up
Battery Stopper
NEXT
Menus and Settings Troubleshooting