Unprotecting An Image - Contax U4R Manual

Introduction
6
Press the MENU button K.
A Important
[ERASE ALL] (
(
B Note
In SINGLE playback mode, press the SCENE button I to view the protection settings
screen. Move the selector lever up u to select [SET] and press E to protect the currently
displayed image.

Unprotecting an image

1
Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select PROTECT [U] and press E.
4
Move the selector lever left l or right r to select the image
to be unprotected.
The [U] icon is displayed with protected images.
5
Move the selector lever up u to select
[EXECUTE], then press E.
The image protection is removed.
BNote
6
Press the MENU button K.
Contents Glossary
Getting Ready Taking Pictures
p.106) does not erase protected images. However, [FORMAT]
p.163) erases all of the images on the card, including protected images.
• To unprotect another image, repeat steps 4 and
5.
• In GROUP playback, all of the images in a
group of continuous shots are unprotected when
you unprotect an image from a group.
Index
Playback
EN-108
Nomenclature
Set Up
PROTECT
UNPROTECT?
EXECUTE
RETURN
BACK NEXT
Menus and Settings Troubleshooting