Contax U4R Manual page 12

Introduction
<Precautions for Using the AC Adapter>
FWARNING
FCAUTION
• Prolonged use may cause the AC adapter to feel warm; this is a normal phenomenon and not a malfunction.
• When not using the AC adapter for an extended period of time, first remove the plug from the USB cradle,
then disconnect the adapter from the AC outlet.
• If you wish to use the AC adapter while batteries are loaded in the camera, first set the camera's power
switch to OFF, then connect the AC adapter before turning on the camera again.
Contents Glossary
Getting Ready Taking Pictures
• Be sure that AC adapter plugs are connected securely before use. Loose
plugs and poor contacts can cause generation of heat, fire, and electrical
shock.
• Do not attempt to modify the AC adapter's cords, or subject them to
unreasonable force. Damage to the cords can cause fires and electrical
shock. If cords become so damaged that their wire cores are exposed,
discontinue use and consult your dealer or Contax Service Center.
• Do not attempt to remove covers, disassemble, repair or modify AC adapter,
since dangerous electrical shock could result.
• AC adapter plugs that have become laden with dirt or household dust should
not be used or approached with metal objects, since electricity might be
transmitted through the metal, causing fire or personal electrical shock. In the
event of heavy soiling of a plug, remove it from its outlet and clean away the
dirt before reusing.
• In the event that AC adapter plug emits smoke or unusual smell or sound, or if
it is damaged by impact or falling, cease use immediately. Continuing to use a
damaged plug could result in fire danger. In the event of damage to a plug,
consult your dealer or Contax Service Center.
• Do not connect the AC adapter to any sources of power other than a
household AC outlet (AC 100V to 240V; 50/60Hz). Using the adapter with
other voltages or ratings may cause the hazard of fire or electrical shock.
• Use only the dedicated AC adapter supplied with the digital camera. Using
other adapters may result in accidents and fire danger.
• Never attempt to splice the AC adapter cord, or subject it to severe twisting,
bending, or stretching. This may cause breakage or other damage to the
wires, resulting in a risk of fire or electrical shock. Plugging the cord into a low
capacity power outlet, etc. may cause a fire.
• Do not connect or disconnect the AC adapter with wet hands, since personal
electrical shock could result.
• Always grasp the plug body (not cord) when removing the AC adapter plugs
from camera and power outlet. Pulling on the cords could cause breakage or
other damage to the wires, resulting in danger of fire or electrical shock.
• The AC adapter has been designed for exclusive use with this camera. To
prevent the danger of fire and electrical shock, do not use the adapter with
products other than the specific digital camera for which it was designed.
• If you notice any damage to the AC adapter, including broken wires or faulty
plug connections, stop using the AC adapter and consult your dealer or
Contax Service Center as soon as possible.
Index
Playback
EN-12
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting