Chroma] Changing The Color Intensity - Contax U4R Manual

Introduction

[CHROMA] Changing the color intensity

«Applicable mode: C»
The [CHROMA] setting lets you take pictures in which the intensity of the
colors is increased (brighter colors) or decreased (paler colors).
1
Turn the camera on and press the mode
buttons UD until "C" lights up on the
mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select CHROMA [H] and press E.
4
Move the selector lever up u or down d
to select the desired setting and press E.
The chroma settings is updated.
[H+1] [+]
(No icon) [STANDARD]: Uses the standard color intensity. (Default)
[H-1] [-]
5
Press the MENU button K.
The icon for the selected intensity appears on the LCD monitor.
A Important
This setting is retained when you turn the camera off.
B Note
The [STANDARD] setting is used in Black and White mode and Sepia mode.
Contents Glossary
Getting Ready Taking Pictures
: Increases the color intensity.
: Decreases the color intensity.
Index
Playback
EN-83
Nomenclature
Set Up
CHROMA
+
STANDARD
–
BACK NEXT
Menus and Settings Troubleshooting
+1