Erasing A Recorded Message - Contax U4R Manual

Introduction

Erasing a recorded message

Use the procedure below to erase a postrecorded voice message.
1
Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select POSTRECORDING [p] and press
E.
4
Move the selector lever left l or right r to select the image
with the voice message you want to erase.
5
Move the selector lever up u to select
[EXECUTE], then press E.
The voice message is erased and the "RECORD SOUND?" message
appears.
6
Press the MENU button K.
A Important
Audio cannot be erased from protected images.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-113
Nomenclature
Set Up
POSTRECORDING
ERASE SOUND?
EXECUTE
CANCEL
BACK
Menus and Settings Troubleshooting