Contax U4R Manual page 152

Introduction
A Important
• Set the television to video input mode.
• The LCD monitor turns off while the video cable is connected.
• Images may sometimes not be displayed correctly on a television.
B Note
The video output format of the camera can be selected from NTSC and PAL formats.
Because different TV signal formats are used in different countries, when you connect the
camera to a television while on vacation, you should set the video output to the format of
the country you are in. Refer to p.179 to configure this setting.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-152
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting