Contax U4R Manual page 161

Introduction
[J] Erasing individual images (ERASE)
«Applicable images: Still images / movies»
Use the procedure below to erase a single image.
A Important
• You cannot erase protected images (
• When you erase an image with a postrecorded voice message (
1
Press the MENU button K during playback to display the
menu icons.
2
Move the selector lever down d to
select ERASE [J] and press E.
3
Move the selector lever left l or right r to select the image
you want to erase.
4
Move the selector lever up u to select
[EXECUTE], then press E.
The image is erased and the next image appears.
If there are no further images, the "NO IMAGE" message appears.
BNote
5
Press the MENU button K.
Contents Glossary
Getting Ready Taking Pictures
is also erased.
To erase another image, repeat steps 3 and
4.
Index
Playback
p.107).
EN-161
Nomenclature
Set Up
p.110), the sound file
ERASE
EXECUTE
CANCEL
BACK
Menus and Settings Troubleshooting
RETURN