Removing The Memory Card - Contax U4R Manual

Introduction

Removing the Memory Card

1
Check that the camera is turned off and
then open the card/battery cover.
Slide the card/battery cover in the direction of the arrow E to open it.
A Important
2
Push the memory card in gently with your
fingertip.
When the memory card is pushed in slightly, it pops back out and you
can then remove it.
3
Close the card/battery cover.
Close the cover and slide it opposite to the direction of the arrow E to
lock it.
Contents Glossary
Getting Ready Taking Pictures
When the card access LED is blinking, images are being recorded onto the memory
card. Do not open the card/battery cover or remove the memory card while the LED is
flashing as this could cause data corruption or, in some cases, camera damage.
Index
Playback
EN-32
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting