Viewing Still Images - Contax U4R Manual

Introduction

Viewing Still Images

«Applicable images: Still images only»
1
Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
The last image shot appears on the LCD monitor.
2
Move the selector lever left l or right r
to select the image to view.
The table below shows the operations that can be performed during playback.
Operation
Selector lever up u
Selector lever down d
Selector lever left l
Selector lever right r
E
SCENE button I
Continuous shooting
button N
B Note
• Any resized images are displayed before the normal images.
• Resized images are displayed at different sizes depending on the image size. When this
Contents Glossary
Getting Ready Taking Pictures
Switches to the File No display and the information display. (
Erases the image. (
Displays images in reverse order. Hold the lever left for more than one
second to scroll through the images at high speed.
Displays images in forward order. Hold the lever right for more than one
second to scroll through the images at high speed.
Enlarges the image for playback. (
Protects the image. (
Plays back the group of continuous shots if the image belongs to a group
of continuous shots. (
occurs, the resize icon [V] appears in the top-left corner of the LCD monitor. For more
information on resizing images, see "[V] Resizing and Trimming Images (RESIZE)"
( p.114).
Index
Playback
Description
p.103)
p.87)
p.107)
p.94)
EN-86
Nomenclature
Set Up
p.88)
NEXT
Menus and Settings Troubleshooting