Configuring White Balance Manually - Contax U4R Manual

Introduction
5
Press the MENU button K.
The icon for the selected white balance setting appears on the LCD
monitor.
A Important
This setting is retained when you turn the camera off.
B Note
In Sunset mode, Twilight mode, Black and White mode, and Sepia mode, the white
balance is automatically configured as suitable for the mode and cannot be changed.

Configuring white balance manually

«Applicable mode: C/M»
You can configure the white balance by yourself when there are multiple
light sources, or to accurately calibrate white. Reconfigure each time the
light source changes.
1
Turn the camera on and press the mode buttons UD until
"C" or "M" lights up on the mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select WHITE BALANCE [s] and press
E.
4
Move the selector lever down d to select
[SET] and press E.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-81
Nomenclature
Set Up
WHITE BALANCE
SET
BACK NEXT
Menus and Settings Troubleshooting