Contax U4R Manual page 124

Introduction
5
Move the selector lever left l or right r to select the image
for which you want to specify the print settings.
6
Move the selector lever up u to select
[OK], then press E.
7
Move the selector lever up u to select
[PRINT QTY.], then move the lever right r.
8
Move the selector lever up u or down d
to select the number of prints, then press
E.
The number of prints is set.
9
Move the selector lever up u or down d
to select [DATE], then move the lever right
r.
A Important
10
Move the selector lever up u or down d
to select [NOT PRINT] or [PRINT], then
press E.
[NOT PRINT]: The date is not imprinted on the image.
[PRINT] : The date is imprinted on the image.
Contents Glossary
Getting Ready Taking Pictures
If you set [DATE] to [PRINT] in [PRINTING
DETAILS], then print photographs that were shot
with [INSERT DATE] (
DATE], the date will appear twice on the prints.
Index
Playback
p.165) set to [WITH
EN-124
Nomenclature
Set Up
SELECT PRINT IMAGE
OK
RETURN
PRINTING DETAILS
PRINT QTY. 0
DATE NOT PRINT
PRINT SETS EXECUTE
RETURN
PRINTING DETAILS
PRINT QTY. 2
DATE NOT PRINT
PRINT SETS EXECUTE
RETURN
PRINTING DETAILS
PRINT QTY. 2
DATE NOT PRINT
PRINT SETS
EXECUTE
RETURN
PRINTING DETAILS
PRINT QTY. 2
DATE NOT PRINT
PRINT SETS PRINT
RETURN
BACK NEXT
Menus and Settings Troubleshooting