Contax U4R Manual page 72

Introduction
3
Move the selector lever left l or right r
to select METERING [L] and press E.
4
Move the selector lever up u or down d
to select the desired setting and press E.
The metering mode is now set.
(No icon) [EVALUATION] : The entire screen is partitioned into 256
[G] [CENTER]
[q] [SPOT AREA] : The exposure is determined by measuring
5
Press the MENU button K.
The icon for the selected metering mode appears on the LCD monitor.
A Important
This setting is retained when you turn the camera off.
Contents Glossary
Getting Ready Taking Pictures
zones and the light in each zone is
measured to determine the optimum
exposure for the subject. (Default)
: The exposure is determined by measuring
the light and giving greater weight to the
central part of the screen (an area larger
than that used for spot metering).
the light at the center of the screen.
Index
Playback
EN-72
Nomenclature
Set Up
METERING
EVALUATION
CENTER
SPOT AREA
BACK
Menus and Settings Troubleshooting