Switching Between Macro And Landscape Mode; Macro Mode - Contax U4R Manual

Introduction

Switching Between Macro and Landscape Mode

«Applicable mode: C/M»
Macro and Landscape modes help you select the best possible camera
settings for shots of close-up subjects and distant scenery.
1
With the camera ready to shoot in "C" or
"M" mode, press the Macro/Landscape
button O.
The camera changes between Macro and Landscape mode each time
the Macro/Landscape button O is pressed.
Normal
(Default)
A Important
This setting reverts to the default value when you turn the camera off.
B Note
You cannot change Macro/Landscape mode while in Twilight or Night View scene modes.
c Macro Mode
Macro mode allows you to take close-up pictures at distances as close as
approx. 20 cm (7.9")*
1
is locked in the wide-angle position (shortest focal length), the zoom does
not function.*
2
As flash mode, you can select either b Fill-in Flash mode, in which the flash
fires for every shot, or g Flash Off mode, in which the flash never fires.
( p.63)
* Distance measured from the glass cover plate on the lens to the subject.
1
* Only the digital zoom can be used.
2
Contents Glossary
Getting Ready
O
c
Macro
O
from the subject. Because the focal length of the lens
Index
Taking Pictures Playback
O
Y
Landscape
EN-56
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting
Approx.
20 cm