Printing Multiple Images - Contax U4R Manual

Introduction
4
Move the selector lever up u to select
[EXECUTE], then press E.
Printing begins, and when printing is successfully completed, the print
completion screen appears.
A Important
BNote

Printing multiple images

1
In the print menu screen, move the
selector lever up u or down d to select
[PRINT MULTIPLE IMAGES] and then
press E.
The print image selection screen appears.
2
Move the selector lever up, down, left or
right udlr to select an image you
want to print, then press E.
The [T] icon appears next to the selected images. Repeat this step to
select the rest of the images you want to print. To deselect a selected
image, select an image marked with the Print icon [T] and press E.
BNote
Contents Glossary
Getting Ready Taking Pictures
If an error occurs during printing, an error
message is displayed and printing stops. Refer to
p.190 for information on the message displayed
and the correct response.
• You can specify the print settings by clicking the
SCENE button I before proceeding with this
step. (See steps 2 to 12 on p.130 for information
on the setting procedure.)
• During printing, a counter on the LCD monitor
displays the total number of prints and the
number of prints completed so far.
• Press the MENU button K to stop printing in
progress.
You can select up to 99 images.
Index
Playback
EN-133
Nomenclature
Set Up
EXECUTE PRINT?
PRINT QTY. 9
PAPER SIZE
2L
PAPER TYPE PHOTO
BORDERLESS YES
DATE NOT PRINT
EXECUTE
CANCEL
PRINT MENU
SINGLE PRINT
PRINT MULTIPLE IMAGES
DPOF PRINTING
PRINT SETTINGS
SELECTED TO PRINT: 3
SEL/DESEL
OK
RETURN
BACK NEXT
Menus and Settings Troubleshooting