Erasing All The Images (Erase All) - Contax U4R Manual

Introduction

Erasing all the images (ERASE ALL)

You can use the procedure below to erase all the images recorded on a
memory card.
A Important
• You cannot erase protected images (
• When you erase an image with a postrecorded voice message (
1
Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select ERASE MULTIPLE [I] and press
E.
The multiple erase screen appears.
4
Move the selector lever up u or down d
to select [ERASE ALL], then press E.
A message appears asking you to confirm that you want to erase the
images.
5
Move the selector lever up u to select
[EXECUTE], then press E.
All the images are erased and the "NO IMAGE" message appears.
A Important
Contents Glossary
Getting Ready Taking Pictures
is also erased.
If there are images still shown after you use
[ERASE ALL], those images may be protected. To
forcibly erase all the images, format the memory
card. ( "[FORMAT] Initializing a Memory Card"
p.163)
Index
Playback
p.107).
EN-106
Nomenclature
Set Up
p.110), the sound file
ERASE MULTIPLE
ERASE MULTIPLE
SELECT AND ERASE
ERASE ALL
RETURN
ERASE ALL?
EXECUTE
CANCEL
BACK
Menus and Settings Troubleshooting