Mode Reset] Resetting Function Settings - Contax U4R Manual

Introduction

[MODE RESET] Resetting Function Settings

Use this function when you want to reset the modes and menu settings that
you have changed, back to their default settings.
1
Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
The SET UP menu screen is displayed.
2
Move the selector lever up u or down d
to select [MODE RESET], then move the
lever right r.
3
Move the selector lever up u to select
[EXECUTE], then press E.
The settings are reset and the SET UP menu screen reappears.
Contents Glossary
Getting Ready Taking Pictures
Index
Playback
EN-184
Nomenclature
Set Up
SET UP(3/3)
VIDEO OUT NTSC
STARTUP MODE STILL
DISPLAY INFO ON
FILE NO. EXECUTE
MODE RESET EXECUTE
RESET CAMERA?
EXECUTE
CANCEL
Menus and Settings Troubleshooting