Setting The Film Speed - Contax AX Instruction Manual

The film speed can be set in two ways: automatic setting
with DX codes and manual setting.
The film speed can be checked in the display panel.
When "DX" is indicated in the display panel, the film
speed is automatically set by the DX code. When
using film with DX code, no adjustment is required.
Without the "DX" mark in the display panel, be sure to
set the film speed manually.
rso
Ll,Lif [F
<Setting the film speed>
1
Turn the main switch on. While depressing the
I
exposure mode lock release button, turn the
exposure mode selector lever to set the exoosure mode
index to "lSO".
The "DX" or "lSO and film speed" will be indicated in the
display panel.
50