Chapter 3. Configuration
MIB II Standard Alarm Traps
Trap
Cold Start
Link Up
Link Down
Authentication
Failure
Read Community Name
Enter the authentication strings used for SNMP management.
Match the MX2800 to the SNMP manager for read privileges.
Write Community Name
Enter the authentication strings used for SNMP management.
Match the MX2800 to the SNMP manager for write privileges.
Trap Community Name
Enter the identification string used for trap management. This
string accompanies all traps transmitted by the MX2800.
System Security
Password
Set the password required at login (up to 32 characters). The default
password is adtran (all lower case).
Terminal Timeout
Set the amount of time the terminal or Telnet session remains
inactive before automatically closing the session, requiring the user
to log in again. The options include D
MIN
3-24
If enabled, the unit issues a trap when...
the unit is first powered up.
the DS3 is up with no alarms.
the DS3 is in alarm.
an attempt has been made by an unauthorized
user to access the unit.
., 60
., or 1
.
MIN
DAY
MX2800 User Manual
, 1
., 5
ISABLED
MIN
MIN
61200290L1-1
., 15