Table of Contents
Advertisement
Assigning/Releasing Function
Licenses
You can assign function licenses to the switchers and
boxes in an island.
To assign a function license, the function license must be
installed beforehand.
For details about installing a function license, see
"Managing and Installing Licenses" (page 490).
Function licenses assigned to switchers:
MZS-X1770: Automation IF License
Function licenses assigned to boxes:
MZS-X1500: 4K Upgrade License
MZS-X1750: HDR Converter License
MZS-X1610: 3D DME License
MZS-X1620: SL Key License
MZS-X1800: Clip Player License
Note
The MZS-X1500 4K Upgrade License is assigned/
released for each switcher and is applied collectively to
the boxes configured in each switcher.
1
Open the MLS Manager Home > System > Island >
Assign Licenses menu (60211.08).
2
Select the target switcher or box to set.
Place a check mark for the target switcher or box to
set (multiple selection supported).
To select and set all switchers or boxes, place a check
mark in the Select All checkbox.
3
Press the [Edit] button.
The [Edit Licenses] window appears.
4
Press the [Assign] button for the function licenses to
assign.
To release a function license assignment
Press the [Release] button.
5
Press [OK].
To display the properties of an assigned function
license
Press the [Display Properties] button.
Configuring Initial Setup
You can specify the setup/content package archive file to
load/import when a switcher in an island reboots after
changing the switcher settings.
Note
When a package archive file is specified, all package files
on the current switcher are deleted.
1
Open the MLS Manager Home > System > Island >
Initial Setup menu (60211.09).
2
Press the [Select] button on the target switcher to set.
The [Select Initial Setup Archive File] window
appears.
3
Select the target package archive file.
4
Press [OK].
5
Set the detailed options for when importing/loading a
package archive file.
[Load Setup] button: Specify whether to load the
setup data, register data, and system
configuration data from the selected package
archive file.
Notes
• Control panel setup data is loaded into both the
control panels with panel ID of 1 and 2.
• When loading files in batch, as described in
"Batch File Operations" (page 337), user
account system configuration data is not
loaded, however, user account system
configuration data is also loaded for the island
configuration.
[Import Content] button: Specify whether to import
the content data from the selected package
archive file.
[Load Content] button: Specify whether to load the
content data from the selected package archive
file.
Note
When the [Import Content] button is on, all content
data in the package archive files on the current
switcher are deleted.
6
Enable/disable the ELC-MVS01 support function of
the switcher using the [ELC-MVS01 Support] button.
On: Enable the ELC-MVS01 support function of the
switcher.
Off: Disable the ELC-MVS01 support function of the
switcher.
To release the specified package archive file to
load or import
Select the target package archive file to release and press
the [×] button.
482
Advertisement
Table of Contents
