Table of Contents
Advertisement
If the system settings are disabled, press the [Adjust
Details] button and configure the HDR conversion
settings in the [HDR Converter] window.
Note
When multiple outputs are selected, the [Follow
System Settings] switch settings do not change in
unison.
[HDR Converter] window > [Config] tab
Configure the output signal in the same way as for an
input signal.
For details, see "[HDR Converter] window > [Config]
tab" (page 375).
Note
Only the [Master Black (Abs.)] button and [HDR Black
Offset] button settings are available in the [Black Level]
group for an output signal.
[HDR Converter] window > [Conversion]
tab
Configure the output signal in the same way as for an
input signal.
For details, see "[HDR Converter] window >
[Conversion] tab" (page 375).
Note
This cannot be set when the system OETF and output
signal OETF are set to [SDR].
[HDR Converter] window > [Additional
Paint] tab
Configure the output signal in the same way as for an
input signal.
For details, see "[HDR Converter] window >
[Additional Paint] tab" (page 376).
Notes
• When the look conversion function is set using the
[Look Conversion] button and the system OETF is set
to [PQ], [S-Log3 (HDR)], or [S-Log3 (Live HDR)],
[Natural] cannot be selected for [Input Look]. When the
output signal OETF is set to [PQ], [S-Log3 (HDR)], or
[S-Log3 (Live HDR)], [Natural] cannot be selected for
[Output Look].
• When the look conversion function is set using the
[Look Conversion] button and the system OETF is set
to [SDR], [Input Look] cannot be set. When the output
signal OETF is set to [SDR], [Output Look] cannot be
set.
Returning [HDR Converter] window
settings to the initial settings
Press the [Default Recall] button in the [HDR Converter]
window.
The settings on all tabs in the [HDR Converter] window
are returned to the following values.
[Config] tab: System settings values
[Conversion] tab: System settings values
[Additional Paint] tab: Default values
381
Advertisement
Table of Contents
