Table of Contents
Advertisement
Note
A key snapshot cannot be registered using the numeric
keypad control block.
1
Recall an effect timeline register/snapshot register to
register in a shotbox.
To register an effect timeline register
Press the [EFF] button to switch to effect timeline
operation mode and select the target register to
register for each region.
For details about the method of operation, see
"Recalling an Effect Timeline" (page 259).
To register a snapshot register
Press the [SNAPSHOT] button to switch to snapshot
operation mode and select the target register to
register for each region.
For details about the method of operation, see
"Recalling a Snapshot" (page 284).
2
Press the [SHOTBOX] button.
The [SHOTBOX] button and [RCALL] button turn
on amber, and the numeric keypad control block
switches to shotbox operation mode.
3
Press the [STORE] button.
The [RCALL] button turns off and the [STORE]
button turns on amber.
The [EFF] button (for an effect timeline) or the
[SNAPSHOT] button (for a snapshot) turns on green.
Note
If the [EFF] button/[SNAPSHOT] button does not
turn on, press the [EFF] button/[SNAPSHOT] button,
turning it on green.
4
Select a region for the effect timeline/snapshot to
register in the shotbox using the region selection
buttons.
Press the region selection button, turning it on, for the
target region to register.
For details about selecting a region, see "Selecting a
region" (page 258).
5
Enter a shotbox register number in the numeric
keypad area.
6
Press the [ENTER] button.
The [STORE] button turns off and the [RCALL]
button turns on amber.
Editing a shotbox
You can change an effect timeline/snapshot register and
the region to register in a shotbox.
1
Press the [SHOTBOX] button.
The [SHOTBOX] button and [RCALL] button turn
on amber, and the numeric keypad control block
switches to shotbox operation mode.
2
Recall the target shotbox register to edit.
Enter a register number in the numeric keypad area
and press the [ENTER] button.
3
Change the effect timeline register/snapshot register
registration.
To change an effect timeline register registration
Press the [EFF] button to switch to effect timeline
operation mode and select the target register to
register for each region.
For details about the method of operation, see
"Recalling an Effect Timeline" (page 259).
To change a snapshot register registration
Press the [SNAPSHOT] button to switch to snapshot
operation mode and select the target register to
register for each region.
For details about the method of operation, see
"Recalling a Snapshot" (page 284).
4
Press the [STORE] button.
The [RCALL] button turns off and the [STORE]
button turns on amber.
The [EFF] button (for an effect timeline) or the
[SNAPSHOT] button (for a snapshot) turns on green.
To delete the region for an effect timeline/
snapshot registered in a shotbox
Press the region selection button, turning it off, for the
target region to delete.
To check the region for an effect timeline
registered in a shotbox
While the [EFF] button is lit, press and hold the
[STORE] button. While the [STORE] button is
pressed, the region selection button for the region in
which the effect timeline is registered is lit amber.
To check the region for a snapshot registered in a
shotbox
While the [SNAPSHOT] button is lit, press and hold
the [STORE] button. While the [STORE] button is
pressed, the region selection button for the region in
which the snapshot is registered is lit amber.
298
Advertisement
Table of Contents
