Sony MKS-X1115 User Manual page 147

3
Set the [Dual Rszr Effect] button to the on state.
4
Set the [Drop Shadow] button to the on state and set
the following parameters.
No. Parameter
1 H
2 V
3 Size
4 Soft
5 Density
a) Common to the [Soft] wide key border parameter.
Setting edge enhance
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
3
Set the [Edge Enhance] button to the on state and set
the following parameters.
No. Parameter
1 H
2 V
3 All
Setting a mosaic
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
3
Set the [Mosaic] button to the on state and set the
following parameters.
No. Parameter
1 Size
2 Aspect
4
In the [Mosaic/Defocus Mode] group, select a signal
to which to apply the mosaic effect.
Video/Key: Video signal and key signal
Adjustment
Shadow position in the
horizontal direction
Shadow position in the
vertical direction
Shadow size
a)
Softness of shadow
Density of shadow
Adjustment
Gain in horizontal direction
Gain in vertical direction
Simultaneous adjustment of
gain in horizontal direction
and vertical direction
Adjustment
Tile size
Tile aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.
Video: Video signal
Note
When a video signal and key signal are selected for
mosaic, crop and mask are disabled.
To make a mosaic look like a relief
Set the [Relief] button to the on state and set the following
parameters.
No. Parameter
3 Gain
4 Angle
Setting defocus
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
3
Set the [Defocus] button to the on state and set the
following parameters.
No. Parameter
1 H
2 V
3 All
4
In the [Mosaic/Defocus Mode] group, select a signal
to which to apply the defocus effect.
Video/Key: Video signal and key signal
Video: Video signal
Note
When a video signal and key signal are selected for
defocus, crop and mask are disabled.
To remove the black level leakage that occurs at
the edges of the screen
Set the [Clean Defocus] button to the on state.
Setting a mask
Notes
• When a video signal and key signal are selected for
resizer mosaic/defocus, mask is disabled.
• When a mask effect is applied to a border, the boundary
becomes discontinuous, giving an unnatural effect.
Avoid applying a mask to a border.
147
Adjustment
Tile gain
Light source direction
Adjustment
Defocusing in horizontal
direction
Defocusing in vertical
direction
Simultaneous defocusing
adjustment in horizontal
direction and vertical direction