Name and Function of Parts
a Red tally light
Turns on when a red tally signal is received. When the CALL
button on the video camera, the MSU-1000 Master Setup
Unit, or the RCP-1000 series Remote Control Panel is
pressed, the light turns off if lit or turns on if not lit.
A supplied number plate can be attached (see following
b Yellow tally light
Turns on when a yellow tally signal is received.
c Green tally light
Turns on when a green tally signal is received.
d CCU number display
Displays the camera number specified in the menu of the
CCU for a system connection.
A number is not displayed when this unit is used as an
e NMI LAN STATUS Indicators
Displays the status of NMI-LAN.
1: Corresponds to SLOT1 LIVE NMI LAN 1 to 2.
2: Corresponds to SLOT1 REPLAY NMI LAN 1 to 2.
3: Corresponds to SLOT2 NMI LAN 1 to 2.
Green: Normal state
Flashing green: Network synchronization process is in
Off: SFP+ module is not installed.
IP Live System Manager has been disconnected.
IP Live System Manager connection is being established.
Flashing red: Not locked to network synchronization signal.
Signal reception is unavailable.
f Assignable buttons
You can assign functions to these buttons from the BPU
g Status display indicators
REF IN (green): Indicates presence of reference input signal.
USB connector (for service personnel)
UNLOCK (red): Indicates operation is not synchronized to
input reference signal.
When connected to a CCU, REF IN and UNLOCK
indicate the lock status for the CCU.
NETWORK: Displays the camera control system LAN
On: Indicates that an external control device (MSU-1000
Master Setup Unit or RCP-1000 series Remote
Control Panel) is connected when the CNS MODE
setting in <CNS SETTINGS> is set to BRIDGE.
Flashing: Indicates that an external control device
(MSU-1000 Master Setup Unit or RCP-1000 series
Remote Control Panel) is not connected successfully
when the CNS MODE setting in <CNS SETTINGS>
is set to BRIDGE.
Off: Indicates that the LAN cable is not connected or
network system connection parameters have not
been set when the CNS MODE setting in <CNS
SETTINGS> is set to BRIDGE.
The indicator is always off when CNS MODE is set to
For details, see "<CNS SETTINGS>" (page 21).
COM ERROR (red): Indicates a communications error with
the video camera, CCU, or external control device (such
as an RCP-1000 series Remote Control Panel).
FAN STOP (red): Indicates the internal fan has stopped.
h SYSTEM/ACCESS/SHARE PLAY indicators
Displays the status of the server.
Green: Operating normally
Green (flashing once per second): Starting up
Orange (flashing once per second): Warning message
Red (high-speed flashing four times per second): Serious
error has occurred.
Purple (flashing once per second): Network reset is in
Displays the access status of storage.
Off: Not being accessed
Blue (flashing): Formatting or deleting files