Sony MKS-X1115 User Manual page 29

a Transition settings/execution buttons (assignable
buttons)
You can assign functions, such as settings and execution,
for transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 408).
Note
The functions that can be assigned to the four buttons at
the top and the five buttons on the left are different.
Transition type selection buttons
The following functions can be assigned to both the four
buttons at the top and the five buttons on the left.
Function Button Description
name name
Mix MIX Selects mix.
NAM NAM Selects NAM (non-additive mix).
Super Mix SUPER Selects super mix.
MIX
Preset PST Selects preset color mix.
Color Mix COLOR
MIX
Wipe WIPE Selects wipe.
DME Wipe DME Selects DME wipe.
WIPE
FM 1&2 FM1&2 Selects clip transition.
Clip to FM CLIP to
15&16 Clip FM15&16
CLIP
Wipe direction selection buttons
The following functions can be assigned to the four
buttons at the top only.
Function Button Description
name name
Reverse REV When not lit, the wipe proceeds
in the direction from black to
white of the pattern images,
shown in "Wipe Pattern List"
(page 499), or in the direction of
the arrows (normal).
When lit, the wipe proceeds in
the opposite direction of normal
(reverse).
Normal/ NORM/ The wipe direction alternates
Reverse REV between normal and reverse
after each transition.
Transition/macro execution buttons
The following functions can be assigned to the five
buttons on the left only.
Function Button
name name
Take TAKE
Cut CUT
Macro MCRO
Take TAKE
Keyframe fader button
The following functions can be assigned to both the four
buttons at the top and the five buttons on the left.
Function Button
name name
KF KF
Pattern limit setting buttons
The following functions can be assigned to the four
buttons at the top only.
Function Button
name name
Limit Set LIMIT SET Sets the pattern limit.
Pattern PTN LIMIT Enables the pattern limit.
Limit
Main/sub switching buttons (multi program 2
mode)
The following functions can be assigned to the four
buttons at the top only.
Function Button
name name
Main MAIN
Sub SUB
b Display
Displays the transition rate.
29
Description
Executes an auto transition with
the set transition rate and
transition type.
During the transition, the button
is lit amber.
Executes an immediate
transition.
Executes a macro.
Description
Uses the fader lever as a
keyframe fader.
Description
Description
Switches operation to the
function on the main side in multi
program 2 mode.
Simultaneously pressing the
[SUB] button activates both the
main and sub operations.
Switches operation to the
function on the sub side in multi
program 2 mode.