Table of Contents
Advertisement
When MKS-X1115 SDI Input & Output Boards are installed
For details about common parts, see "When MKS-X1110
IP Input & Output Boards are installed" (page 62).
Cross-point box
M/E box
a OUTPUT connectors (BNC type)
Program outputs, preview outputs, and AUX outputs can
be assigned and output as serial video signals.
A format converter can be configured on the odd-
numbered ports of video signals. Signals are either an
"Output" or "Dedicated Output" type, depending on the
type of the assigned signal.
For details, see "Setting the Output Signal" (page 377).
For details about output numbers, see "Input/Output
Numbers" (page 511).
b XPT PORT A to C connectors (QSFP28 type)
Used when building an island with multiple boxes.
Connectors for connecting the cross-point box and M/E
boxes using interconnection cables.
XPT PORT in slot number 1 of the cross-point box is not
used. Do not connect it to anything.
c
a
b
c
a
b
For details about connecting, refer to the MLS-X1
Installation Manual.
c INPUT connectors (BNC type)
Inputs serial video signals.
A format converter can be configured on the odd-
numbered ports of video signals.
When the system signal format is 2160P, only odd-
numbered connectors are enabled. The port numbers for
odd-numbered connectors 1, 3, 5, 7 and so on become 1,
2, 3, 4 and so on.
For details, see "Setting the Input Signal" (page 372).
For details about input numbers, see "Input/Output
Numbers" (page 511).
64
Advertisement
Table of Contents
