Sony MKS-X1115 User Manual page 188

Video playback operations
a b
e f
a Playback start point
You can enter a playback start point in the numeric
keypad window.
b Current playback position
You can enter a playback position in the numeric keypad
window to move to that position.
To set the playback position, set the following parameter.
No. Parameter Adjustment
1 FM1 Current Current playback position
c Repeat (loop) playback
When repeat playback is set, a loop or ping-pong icon and
the number of repetitions are displayed.
d Playback stop point
You can enter a playback stop point in the numeric
keypad window.
e Start of video content
f Playback operation buttons
Button Operation
Move to start of video content
Move to video playback start point
Reverse playback
Pause playback
Playback
Move to video playback stop point
Move to end of video content
c d
g
188
Button Operation
Set current position as playback start point
Set current position as playback stop point
g End of video content
To play audio
Set the [Audio On] switch to the on state.
To repeat playback (looping)
1
Press the [Set Loop Playback] button.
The [Set Loop Playback] window appears.
2
In the [Loop Mode] group, set repeat playback.
Off: Turns repeat playback off.
Loop: Loop playback.
When the playback stop point is reached,
playback continues from the playback start point.
When the playback start point is reached in
reverse playback, playback continues from the
playback stop point in reverse playback.
Ping-Pong: Ping-pong playback.
When the playback stop point is reached,
playback continues toward the playback start
point in reverse playback.
When the playback start point is reached in
reverse playback, playback continues toward the
playback stop point in normal playback.
When the [Loop] button or [Ping-Pong] button is
selected, set the number of repetitions in the [Repeat]
group.
Set the repetitions radio button to the on state, press
the input field, and enter the number of repetitions in
the numeric keypad window.
To repeat indefinitely, set the [Infinite Loop] radio
button to the on state.
3
Press [OK].
To change the playback speed
Set the [Variable Speed] button to the on state and set the
following parameter.
No. Parameter Adjustment
2 FM1 Speed Playback speed (0% to 200%)
Note
When the [Variable Speed] button is set to the on state,
audio is not played.