Table of Contents
Advertisement
Note
Multiple selection is supported only for LANs of the
same type (such as Util LAN 1 type, User LAN 1
type).
3
Press the [Edit Network I/F] button.
A setup window for the selected network interface
appears.
4
Press the [LAN] button and select a LAN to set from
the pull-down list.
The types of LAN which can be set will vary
depending on the selected network interface.
Note
When multiple network interfaces are selected, the
[LAN] button is grayed out and cannot be changed.
When a LAN for redundancy is selected
The same settings as the main LAN are applied.
Proceed to step 11.
5
Press the [Mode] button for [IPv4] and select a setup
mode from the pull-down list.
Off: Do not use IPv4.
Manual: Set manually.
DHCP: Set automatically using DHCP.
When [Off] or [DHCP] is selected, proceed to step 8.
Note
When multiple network interfaces are selected, the
same value is set for all selected network interfaces.
6
Press the [Address] button for [IPv4] and enter an
address using the keyboard.
Note
When multiple network interfaces are selected,
consecutively numbered IP addresses are set.
7
Press the [Prefix Length] button for [IPv4] and enter
a prefix length in the numeric keypad window.
Note
When multiple network interfaces are selected, the
same prefix length is set for all selected network
interfaces.
8
Press the [Mode] button for [IPv6] and select a setup
mode from the pull-down list.
Off: Do not use IPv6.
Manual: Set manually.
Auto: Set automatically using RA (Router
Advertisement).
DHCP: Set automatically using DHCP.
When [Off], [Auto], or [DHCP] is selected, proceed
to step 11.
Note
When multiple network interfaces are selected, the
same value is set for all selected network interfaces.
9
Press the [Address] button for [IPv6] and enter an
address using the keyboard.
Note
When multiple network interfaces are selected,
consecutively numbered IP addresses are set.
10
Press the [Prefix Length] button for [IPv6] and enter
a prefix length in the numeric keypad window.
Note
When multiple network interfaces are selected, the
same prefix length is set for all selected network
interfaces.
11
Press [OK].
Setting the host name of a box
1
Open the MLS Manager Home > System > Island >
Box Network menu (60211.05).
2
In the [Box] group list, select the target box to set.
3
Press the [Edit Hostname] button and enter a host
name (up to 63 characters) using the keyboard.
4
Press [OK].
Setting the default gateway of a box
1
Open the MLS Manager Home > System > Island >
Box Network menu (60211.05).
2
In the [Box] group list, select the target box to set.
3
Press the [Edit Gateway] button.
The [Default Gateway Settings] window appears.
4
Press the [LAN] button for [IPv4] and select the
target LAN to set from the pull-down list.
Select [Ctrl LAN], [Util LAN 1], [Util LAN 2], [User
LAN 1], or [User LAN 2].
479
Advertisement
Table of Contents
